Screwdrivers torque and angle control for the automatic bolting applications components with reduced dimensions and especially for critical junctions where great accuracy is needed and control of the angle (number of turns) around the tightening process. This series of screwdrivers are controlled by current (digitork) and are driven by a servo motor with incremental encoder and planetary box. The controller is designed to perform control of the servomotor, the calculation of torque and angle measurement. You are still able to communicate with the PC via RS232 or USB interface of inputs and outputs (12/8) and presentation of results in the display of 8 lines. Its characteristics give this bolting system versatility and reliability for use in demanding assembly processes, ensuring a process of screwing precise and controlled even under difficult conditions.
Main features:
-
Screwdrivers with torque from 1.5 Ncm to 800 Ncm for automatic use;
-
Backrest Drive By (push-to-start) or button;
-
Screwing multistep process control with torque and angle;
-
Interface inputs and outputs for connection to external controllers (PCLs);
-
Multipoint communication via USB for parameterization, collect and process control charts;
-
Error indication on the display and the LED;
-
Programming and selection of up to 16 different programs;
-
Possibility of storing all values of torque and angle at every step of the tightening process.
Modelo Torque Speed Drive bit Weight (Kg)
ETF M 05 1.5-5 1000 HM 4 mm 0,4
ETF M 10 3-10 1000 HM 4 mm 0,4
ETF M 20 4-20 800 HM 4 mm 0,4
ETF M 50 15-50 1000 HM 4 mm 0,8
ETF M 80 16-80 1000 HM 4 mm 1,2
ETF M 100 30-100 1000 1,4" Hex 1,2
ETF M 200 60-200 600 1,4" Hex 1,2
ETF M 400 100-400 500 1,4" Hex 1,8
ETF M 800 300-800 400 1,4" Hex 2.6
-
Screwdriver provided with:
-
Power supply
-
Cable to the controller
-
USB Cable
-
Software Tools Talk MT
Previous product
