ETD Series M-L

Screwdrivers control torque and angle for bolting applications operating components of reduced dimensions and especially for critical junctions where great accuracy is needed and control of the angle (number of turns) around the tightening process.
This series of screwdrivers are controlled by current (digitork) and are driven by a servo motor with incremental encoder and planetary box.
The controller is designed to perform control of the servomotor, the calculation of torque and angle measurement. You are still able to communicate with the PC via RS232 or USB interface of inputs and outputs (12/8) and presentation of results in the display of 8 lines.
Its characteristics give this bolting system versatility and reliability for use in demanding assembly processes, ensuring a process of screwing precise and controlled even under difficult conditions.
Main features:

• Screwdrivers with torque from 10 Ncm to 400 Ncm for manual use;
• Drive by back (push-to-start) or button;
• Tightening multistep process control with torque and angle;
• Interface inputs and outputs for connection to external controllers (PCLs);
• Multipoint Communication via USB for parameterization, collect and process control charts;
• Error indication in the display and the LED;
• Programming and selection of up to 16 different programs;
• Possibility to store all values of torque and angle at every step of the tightening process.

 

Model	Torque (Ncm)	Speed (rpm)	Drive Bit	Weight (Kg)
ETD M 40 L	10-40	1000	HM 4 mm	0,65
ETD M 50 L	15-50	1000	HM 4 mm	0,65
ETD M 80 L	16-80	1000	HM 4 mm	0,65
ETD M 100 L	25-100	1000	1/4" HEX	0,65
ETD M 200 L	50-200	700	1/4" HEX	0,65
ETD M 250 L	75-250	600	1/4" HEX	0,65
ETD M 400 L	150-400	500	1/4" HEX	0,65

 Screwdriver provided with:

• Power supply
• Connection cable to controller
• USB Cable
• Software Tools Talk MT